Electric Motors
Electric Motor Suppliers in Ahmedabad Gujarat1. SAFE AREA MOTORS
Frame | Power (kW) | Polarity | |
Standard Motors | 63 to 355 | 0.18 to 315 | 2, 4, 6, 8 |
IE2 Motors | 71 to 355 | 0.37 to 375 | 2, 4, 6 |
IE3 Motors | 80 to 355 | 0.75 to 315 | 2, 4, 6 |
IE4 Motors | 112M to 180L | 2.2 to 22 | 4 |
Large LT Motors(DCCA) | 80 to 355 | 0.75 to 315 | 2, 4, 6, 8 |
2. HAZARDOUS AREA MOTORS
Motor Type | Frame | Power (kW) | Polarity |
Standard Flame Proof Motors | 80 to 315 | 0.37 to 200 | 2, 4, 6, 8 |
IE2 Flame Proof Motors | 80 to 315 | 0.37 to 200 | 2, 4, 6 |
IE3 Flame Proof Motors | 80 to 315 | 0.75 to 180 | 2, 4, 6 |
Non – Sparking Motors | 63 to 400 | 0.12 to 560 | 2, 4, 6, 8 |
Increased Safety Motors | 63 to 355 | 0.12 to 400 | 2, 4, |
3. CRANE & HOIST APPLICATION MOTORS
Motor Type | Frame | Power (kW) | Polarity |
Crane & Hoist Duty Motors | 71 to 355 | 0.37 to 400 | 4, 6, 8 |
Brake Motors | 71 to 132 | 0.25 to 9.3 | 2, 4, 6, 8 |
Slip ring Motors | 100 to 160 | 1.10 to 10 | 4, 6 |
Textile Motors – Ring Frame | 100 to 160 | 1.1 to 15 | 4 |
4. Medium Voltage Motors
- Voltage – 690 V to 6.6 kV
- Cooling – Type IC 411 / IC 416
- Construction – Horizontal ( IM B3) / Vertical (V1)
- Frame Sizes – MV 315L, MV 355L, MV 400ML & MV 450ML
- kW Range – 160 – 1000 (4 Pole), 160 – 750 (6 Pole), 160 – 560 (8 Pole)
TEFC – BBL TYPE MV
- Frequency – 50 & 60 Hz
- Protection – IP 55/ IP 56
- Starting – DOL / VFD
- Standard – IS/IEC
Standard Features:
- Compact TEFC motors for high efficiency in cast iron/ fabricated mild steel construction
- Dual cooling circuit for even temperature distribution
- Bearing cooling fan on DE for lower bearing temperature & longer regreasing intervals
- Class F Insulation with Class B rise
- Ambient 40 0C & Altitude < 1000M
- Epoxy Mica based vacuum pressure impregnated (VPI) insulation system for long life
- Rotor with Pressure Die cast type Aluminium winding for Ruggedness
- Phase segregated type main terminal box to prevent & withstand high fault levels
- Platinum type RTD s – 6 Nos for windings
- Bearing temperature detectors – 2 No Platinum RTDS. One each at DE and & ODE
- Non condensation heater
- Suitable for direct drive thr’o flexible couplings without external thrust
5. SynchroVERT™ IE4 Motors
SynchroVERT™ range of IE4 motors combines high efficiency with a host of technologically superior features
To complement our portfolio of IE2 and IE3 motors, we now introduce – for the first time in India – our new range of SynchroVERT™ motors that conforms to the Super Premium IE4 class of efficiency. With a remarkably short payback period, they offer significant savings over IE2 and IE3 motors along with a host of technologically superior features.
Energy Efficient Motors Conform To The Following Standards Defined By IEC 60034-30- 1-2014:
- Efficiency Class IE1: Standard efficiency
- Efficiency Class IE2: High efficiency
- Efficiency Class IE3: Premium efficiency
- Efficiency Class IE4: Super Premium efficiency
Advantages Of SynchroVERT™
Key benefits of our IE4 LSPMS motor include:
- Online starting
- Can operate without a VFD
- Lossless excitation
- High efficiency
- High power factor at all loads
- No rotor losses
- Runs at synchronous speed
- Suitable for applications with constant torque below synchronous speed and constant HP above synchronous speed
- Multiple motors run at exactly the same speed without VFDs: this eliminates speed encoders for feedback control
- Starting currents are lower than in IE2 motors; starting torque values are similar to IE2 motors
As these are synchronous motors, the rated speed is synchronous i.e. 1500 RPM. With this motor, a pump or fan will run at about 3% higher speed and it will give much higher discharge/air delivery. Hence if the pump or fan is already fully loading the motor, it cannot be used unless the impellor is redesigned or it is used along with a VFD drive.
In other applications, the higher speed results in more output of the product, eg, spinning frames, textile machines, etc.
Product Range
Type | Frame Size | Type Frame Size kW |
IE4 Super Premium Efficiency – 4H | 112M to 180L | 2.2 to 22 |
- We are counted as the most reliable electric motors supplier in India.
- We only supply electric motors that have international quality standards.
Specifications
- AC Induction Motors, all types & all applications – LT from 63 frame to 560
- AC HV motors (cage & slip ring) 3.3/6.6/11 KV up to 10000 KW
- DC motors 2.2 KW to 1250 KW
- AC single phase & FHP motors
- Pumps (agricultural, domestic & industrial)
- Motors to NEMA & other international Standards
Widely Appreciated For
- Superior quality
- Reliable performance
- Longer working life
- Low maintenance cost
Specifications
Type | Electric Starter Motor |
Certification | CE Certified |
Application | Automobile Industries |
Color | Green |
Voltage | 12-18VDC |
Frequency | 60Hz |
Power | 1Kw |
Warranty | 1yr |